Abstrak: Penelitian ini membahas Manajemen risiko keselamatan dan kesehatan kerja dipabrik tahu x tahun 2012, penelitian ini bersifat deskriptif. Desain studi yangdigunakan merupakan desain studi berdasarkan standar AS/NZS 4360:2004 dengan metode semi kuantitatif menggunakan Job Hazard Analysis (JHA).Analisis risiko dilakukan menganalisis nilai konsekuensi, peluang serta frekuensidan dianalisis menggunakan metode Fine yang ada pada AS/NZS 4360:2004.Hasil penelitian menunjukkan bahwa ditemukan level risiko yang belumacceptable pada setiap proses pembuatan tahu yaitu very high, priority 1,substansial, dan priority 3. Oleh karena itu, diberikan rekomendasi yang bersifatengineering, administrative, serta penggunaaan alat pelindung diri.
Kata kunci:AS/NZS 4360:2004, penilain risiko, kemungkinan, pemajanan, konsekuensi, levelrisiko.

---

This Risk management of safety and health research that was held at plant tofu xin 2012, is a descriptive study. This study design used a study design based onstandard AS / NZS 4360:2004 with a semi-quantitative method using the JobHazard Analysis (JHA). Risk analyzes were conducted to analyze the value of theconsequences, opportunities and the frequency and analyzed using the methods ofFine existing AS / NZS 4360:2004. The results showed that the level of risk thathas not been found acceptable on every process of making out is very high,priority one, substantial, and priority 3. Therefore, given the recommendation thatis engineering, administrative, and use of protective equipment.
Keywords:AS/NZS 4360:2004, risk assessment, probability, exposure, consequences, Levelof risk

Abstrak: Pabrik Tahu X Citeureup merupakan produsen makanan di Kabupaten Bogor yangmemiliki faktor dan potensi bahaya dan risiko pada setiap prosesnya. Penelitian inibertujuan untuk mengetahui risiko keselamatan dan kesehatan kerja, melakukanpenilaian, dan menentukan pengendalian yang mungkin dilakukan. Penelitian inimerupakan penelitian deskriptif dan desain studi cross-sectional denganmenggunakan tool berupa standar manajemen risiko AS/NZS 4360:2004 danperhitungan risiko dengan formula W.T Fine. Hasil penelitian menunjukkan bahwaterdapat level risiko yang belum acceptable pada setiap proses pembuatan tahu,yaitu very high, priority 1, substantial, priority 3, dan acceptable. Rekomendasiyang dapat diberikan bersifat substitusi, engineering, administratif, dan penggunaanAPD.
Kata Kunci: AS/NZS 4360:2004, Penilaian Risiko, Kemungkinan, Pemajanan,Konsekuensi, Level Risiko.

---

Tofu Factory X Citeureup is food producers in. Bogor, which has factors and hazardand risk potentials in each process. This study aims to know the occupational healthand safety risks, do assessment, and determine control may be performed. Thisstudy is a descriptive study and cross-sectional study design using tools such as riskmanagement standard AS/NZS 4360:2004 and risk calculation with the W.T Fineformula. The results showed that there are risk levels not acceptable in any processof making tofu, is very high, priority 1, substantial, priority 3, and acceptable.Recommendations that can be provided is substitution, engineering, administrative,and use of PPE.
Keywords: AS / NZS 4360: 2004, Risk Assessment, Probabilities, Exposure,Consequences, Risk Level.

Abstrak: UMKM Kedelai (Tempe, Tahu, & Oncom) di Kecamatan Citereup Kabupaten Bogor memiliki potensi bahaya dan risiko pada setiap proses kerjanya, sehingga diperlukan manajemen risiko untuk mengidentifikasi bahaya dan menganalisis risiko K3. Jenis penelitian ini deskriptif dengan penentuan tingkat risiko secara semi kuantitatif menggunakan nilai consequences, exposure, dan likelihood mengacu pada metode yang ditemukan oleh W.T. Fine. Hasil penelitian ini menunjukkan bahwa terdapat tingkat risiko tertinggi dengan level Very high antara lain Risiko : Heat stress, Luka Bakar, Kebakaran, Ledakan, Gangguan Pernafasan. Tingkat risiko tertinggi disebabkan oleh Bahaya Panas dan Budaya kerja yaitu merokok pada saat bekerja. Tingkat risiko level Priority 1 antara lain Risiko : NIHL, Tersengat Listrik, Luka Bakar, Iritasi kulit, Keracunan, Tejatuh. Tingkat risiko Priority 1 disebabkan oleh Bahaya Fisik: Bising, Listrik, Bahaya Biologi, Bahaya Kimia. Tingkat risiko level Substantial antara lain Risiko : Low Back Pain, Cedera otot lengan / kaki . Tingkat risiko Substantial disebabkan oleh Bahaya Ergonomi: Posisi janggal, Mengangkat beban yang berat. Tingkat risiko level Priority 3 antara lain Risiko : Stress Kerja. Tingkat risiko Priority 3 disebabkan oleh Bahaya Psikososial: Beban Kerja, Kelelahan.
Kata Kunci: K3, Identifikasi Bahaya, Penilaian Risiko, Manajemen Risiko, Consequences, Exposure, Likelihood, Tingkat Risiko, Evaluasi Risiko, Rekomensdasi Pengendalian.

---

Soybean processing SMEs pose number of potential hazards exposing to the worker. This study aimed identify some potential hazards and evaluate their risk level by using WT Fine method, These results indicate that there is the highest risk level by level Very high risk include : Heat stress, Burn, Fire, Explosion, Respiratory Disorders. The highest risk levels caused by Heat Hazards and work culture that smoke at work. The level of risk levels among others Risk Priority 1 : NIHL, Stung Electricity, Burns, Skin irritation, Toxicity, Toffees. The level of risk due to the Priority 1 Physical Hazards : Noisy, Electricity, Biological Hazards, Chemical Hazards. Substantial levels of risk level among others Risk : Low Back Pain, Muscle Injury Arm / Leg. Substantial risk levels caused by Ergonomics Hazards : Position clumsy, Heavy lifting. The risk level Priority level 3 Risks include : Work Stress. The level of risk caused by the Priority 3 Psychosocial Hazards : Workload, Fatigue.
Keywords: Occupational Health & Safety, Hazard Identification, Risk Assessment, Risk Management, Consequences, Exposure, Likelihood, Level of Risk, Risk Assessment, Control Recommendations.