Ditemukan 41909 dokumen yang sesuai dengan query :: Simpan CSV
Fahzrin Perwitasari; Pembimbing: Dadan Erwandi; Penguji: Ridwan Z. Sjaaf, Adrianus Pangaribuan
Abstrak:
Skripsi ini membahas tentang analisis risiko pada sepuluh tahapan proses yang terdapat pada bagian Low Pressure Die-Casting, PT X plant Onepack Cikarang. Penelitian ini menggunakan desain penelitian deskriptif yang mengacu pada Australian Standar/New Zealand Standard (AS/NZS) 4360 : 2004. Metode yang digunakan dalam analisis risiko adalah metode semi-kuantitatif formula matematika W.T.Fine. Tujuan penelitian adadalah mendapatkan tingkat risiko K3 pada proses kerja LPDC PT X Plant Onepack Cikarang. Hasil penelitian adalah jenis-jenis risiko dan tingkat risiko yang ditentukan dari nilai risiko yang dimiliki pada masing-masing dari sepuluh tahapan proses dibagian LPDC tersebut.
Kata kunci : Analisis risiko, tingkat risiko, nilai risiko.
This final paper discusses about the risk analysis of ten flow procces in Low Pressure Die Casting PT X Plant Onepack Cikarang. This Research used descriptive research design that refer to Australian Standar/New Zealand Standard (AS/NZS) 4360 : 2004. The method which is used in this risk analysis is semi-quantitative method of W.T.Fine math formula. The Objective research is getting the level of occupational safety and health risk of work procces in LPDC PT X plant onepack Cikarang. The result of the research is kind of risks and risk level that determined based on risk values which are had by each risks of ten flow procces.
Keyword : risk analysis, risk level, risk value
Read More
Kata kunci : Analisis risiko, tingkat risiko, nilai risiko.
This final paper discusses about the risk analysis of ten flow procces in Low Pressure Die Casting PT X Plant Onepack Cikarang. This Research used descriptive research design that refer to Australian Standar/New Zealand Standard (AS/NZS) 4360 : 2004. The method which is used in this risk analysis is semi-quantitative method of W.T.Fine math formula. The Objective research is getting the level of occupational safety and health risk of work procces in LPDC PT X plant onepack Cikarang. The result of the research is kind of risks and risk level that determined based on risk values which are had by each risks of ten flow procces.
Keyword : risk analysis, risk level, risk value
S-9169
Depok : FKM UI, 2016
S1 - Skripsi Pusat Informasi Kesehatan Masyarakat
☉
Marthin Julianto Sitorus; Pembimbing: Zulkifli Djunaidi; Penguji: Indri Hapsari Susilowati, Devie Fitri Octaviani
Abstrak:
Penelitian ini membahas tentang analisis risiko K3 pada aktivitas proses wahana PT. X pada bulan Mei-Juni 2018. Penelitian ini menggunakan desain penelitian deskriptif dengan AS/NZS 4360:2004 sebagai standar untuk proses penilaian risiko K3. Metode yang digunakan dalam penilaian risiko adalah semi-kuantitatif formula matematika W. T Fine. Tujuan penelitian ini adalah untuk mengetahui tingkat risiko K3 pada aktivitas proses wahana PT. X. Hasil penelitian menunjukkan bahwa ditemukan 6 risiko terbesar pada tahapan aktivitas kerja dengan level risiko yang belum acceptable, yaitu very high, dan priority 1. Oleh karena itu, diberikan rekomendasi untuk pengendalian dari 6 risiko terbesar tersebut dari masing-masing proses yang bersifat engineering control, dan administrative control.
Kata kunci: AS/NZS 4360:2004, manajemen risiko, penilaian risiko, tingkat risiko.
This research discusses about the risk analysis of occupational health and safety in activity of ride process at PT. X in May-June 2018. This research used descriptive research design with AS / NZS 4360:2004 as the standard for the OHS risk assessment process. The method used in risk assessment is a semi-quantitative mathematical formula W. T Fine. The purpose of this study is to determine the level of OHS risk in the ride process activity of PT. X. The results showed that found the 6 biggest risks at the stage of work activity with the level of risk that has not acceptable, that is very high, and priority 1. Therefore, given the recommendation for the control of the six major risks of each process that is engineering control, and administrative control.
Keywords: AS/NZS 4360:2004, risk management, risk assessment, level of risk
Read More
Kata kunci: AS/NZS 4360:2004, manajemen risiko, penilaian risiko, tingkat risiko.
This research discusses about the risk analysis of occupational health and safety in activity of ride process at PT. X in May-June 2018. This research used descriptive research design with AS / NZS 4360:2004 as the standard for the OHS risk assessment process. The method used in risk assessment is a semi-quantitative mathematical formula W. T Fine. The purpose of this study is to determine the level of OHS risk in the ride process activity of PT. X. The results showed that found the 6 biggest risks at the stage of work activity with the level of risk that has not acceptable, that is very high, and priority 1. Therefore, given the recommendation for the control of the six major risks of each process that is engineering control, and administrative control.
Keywords: AS/NZS 4360:2004, risk management, risk assessment, level of risk
S-9742
Depok : FKM UI, 2018
S1 - Skripsi Pusat Informasi Kesehatan Masyarakat
☉
Hendra Widiyanto; Pembimbing: Sjahrul Meizar Nasri; Penguji: Dadan Erwandi, Laksita Ri Hastiti, Muhamad Dawaman, Yuni Kusminanti
Abstrak:
Read More
Penelitian ini membahas gambaran persepsi risiko keselamatan kerja pada pekerja di PT.X dengan pendekatan paradigma psikometri yaitu kesukarelaan terhadap risiko, kesegeraan dampak, pemahaman risiko berdasarkan pengalaman, potensi dampak risiko, reaksi yang ditimbulkan risiko, keparahan risiko, pengetahuan terhadap risiko, pengendalian terhadap risiko dan tingkat kebaruan risiko. Penelitian ini adalah penelitian kuantitatif dengan desain deskriptif, pengambilan data dengan cara penyebaran kuisioner, dilakukan pada bulan Juni 2024, di PT.X, Sumatera Selatan. Hasil penelitian menunjukkan bahwa mayoritas persepsi risiko keselamatan kerja pada pekerja PT.X adalah baik yaitu sebanyak 55.1% pekerja memiliki persepsi baik (tinggi) dan 44.9% pekerja dari total responden memiliki persepsi buruk (rendah) terhadap keselamatan kerja. Disarankan terhadap PT.X terus meningkatkan pelatihan-pelatihan dan pengawasan terhadap pekerja yang bertujuan untuk meminimalisir tindakan tidak aman dan mencegah kecelakaan kerja di lingkungan operasional PT.X.
This study discusses the description of occupational safety risk perception in workers at PT.X with a psychometric paradigm approach, namely voluntariness of risk, immediacy of impact, understanding of risk based on experience, potential risk impact, risk reaction, risk severity, knowledge of risk, risk control and level of risk novelty. This research is a quantitative research with descriptive design, data collection by distributing questionnaires, conducted in June 2024, at PT.X, South Sumatra. The results showed that the majority of perceptions of occupational safety risks in PT.X workers were good, namely as many as 55.1% of workers had good perceptions (high) and 44.9% of workers from total respondents had poor perceptions (low) of occupational safety. It is recommended that PT.X continue to improve training and supervision of workers which aims to minimise unsafe acts and prevent work accidents in the PT.X operational environment.
T-7146
Depok : FKM UI, 2024
S2 - Tesis Pusat Informasi Kesehatan Masyarakat
☉
Khairina Suwitri; Pembimbing: Zulkifli Djunaidi; Penguji: Indri Hapsari Susilowati, Marina Kartikawati
S-9845
Depok : FKM UI, 2018
S1 - Skripsi Pusat Informasi Kesehatan Masyarakat
☉
Maria Calista; Pembimbing: Hendra; Penguji: Zulkifli Djunaidi, Harry Joharsyah
Abstrak:
Read More
Kegiatan penambangan yang dilakukan oleh perusahaan akan menghasilkan limbah sisa pengolahan batu-batuan yang mengandung kontaminan logam berat yang selanjutnya disebut sebagai tailing. Pemerintah mengeluarkan kebijakan bahwa perusahaan wajib melakukan pemanfaatan tailing guna mengurangi volume tailing di lingkungan. Proses pemanfaatan tailing merupakan bagian yang tidak terpisahkan dari proses bisnis pertambangan dan memiliki sejumlah potensi bahaya dan risiko yang perlu dikelola. Sehingga, penelitian ini dilakukan dengan tujuan untuk mengidentifikasi dan menilai risiko keselamatan dan kesehatan kerja pada proses pemanfaatan tailing di industri pertambangan. Penelitian ini menggunakan desain deskriptif dengan penilaian kualitatif berdasarkan Standar AS/NZS 4360:2004. Penilaian risiko dilakukan melalui analisis tahapan proses kerja, bahaya, unexpected event, dan risiko untuk mengevaluasi probabilitas, konsekuensi, dan tingkat risiko. Hasil penelitian mengidentifikasi sejumlah 86 unexpected events dari total 47 jenis bahaya dalam proses pemanfaatan tailing, yang terbagi menjadi 29 bahaya fisik, 10 bahaya kimia, dan 8 bahaya ergonomi. Penilaian risiko menunjukkan bahwa pada risiko dasar (basic risk) terdapat 8 bahaya rendah, 25 bahaya sedang, 10 bahaya tinggi, dan 4 bahaya ekstrem, sedangkan pada risiko sisa (residual risk) terdapat 32 bahaya rendah, 10 bahaya sedang, 4 bahaya tinggi, dan 1 bahaya ekstrem. Berdasarkan hasil penilaian yang diperoleh, terdapat bahaya yang memerlukan pengendalian tambahan untuk mengurangi risiko, serta prioritas bahaya yang membutuhkan tindakan segera dan perhatian utama dari manajemen.
Mining activities conducted by the company produce waste from the processing of ore containing heavy metal contaminants, referred to as tailings. The government issued a policy that requires companies to utilize tailings to reduce the volume of tailings in the environment. The tailings utilization process is an inseparable part of the mining business process and has a number of potential hazards and risks that need to be managed. Therefore, this research was conducted with the aim of identifying and assessing occupational safety and health risks in the tailings utilization process in the mining industry. This research uses a descriptive design with qualitative assessments based on Standard AS/NZS 4360:2004. Risk assessment was carried out by analyzing the stages of the work process, hazards, unexpected events, and risks to evaluate probability, consequences, and risk levels. The research identified a total of 86 unexpected events from 47 types of hazards in the tailings utilization process, which were divided into 29 physical hazards, 10 chemical hazards and 8 ergonomic hazards. The risk assessment shows that in the basic risk (basic risk) there are 8 low hazards, 25 moderate hazards, 10 high hazards and 4 extreme hazards, while in the residual risk (residual risks) there are 32 low hazards, 10 moderate hazards, 4 high hazards, and 1 extreme danger. Based on the assessment results, certain hazards require additional controls to reduce risks, as well as prioritized hazards that need immediate action and primary attention from management.
S-11674
Depok : FKM UI, 2024
S1 - Skripsi Pusat Informasi Kesehatan Masyarakat
☉
Eske Prativi; Pembimbing: L. Meily Kurniawidjaja; Penguji: Doni Hikmat Ramdhan, Ike Pujiriani
S-7604
Depok : FKM UI, 2013
S1 - Skripsi Pusat Informasi Kesehatan Masyarakat
☉
Arie Khaerul Rahman; Pembimbing: Ridwan Z. Syaaf; Penguji: Robiana Modjo, Jefri Chandra
S-5948
Depok : FKM UI, 2010
S1 - Skripsi Pusat Informasi Kesehatan Masyarakat
☉
Endra Muhamad Fadillah; Pembimbing: L. Meily Kurniawidjaja; Penguji: Indri Hapsari Susilowati, Indri Pujriani
Abstrak:
Penelitian ini membahas Manajemen risiko keselamatan dan kesehatan kerja dipabrik tahu x tahun 2012, penelitian ini bersifat deskriptif. Desain studi yangdigunakan merupakan desain studi berdasarkan standar AS/NZS 4360:2004 dengan metode semi kuantitatif menggunakan Job Hazard Analysis (JHA).Analisis risiko dilakukan menganalisis nilai konsekuensi, peluang serta frekuensidan dianalisis menggunakan metode Fine yang ada pada AS/NZS 4360:2004.Hasil penelitian menunjukkan bahwa ditemukan level risiko yang belumacceptable pada setiap proses pembuatan tahu yaitu very high, priority 1,substansial, dan priority 3. Oleh karena itu, diberikan rekomendasi yang bersifatengineering, administrative, serta penggunaaan alat pelindung diri.
Kata kunci:AS/NZS 4360:2004, penilain risiko, kemungkinan, pemajanan, konsekuensi, levelrisiko.
This Risk management of safety and health research that was held at plant tofu xin 2012, is a descriptive study. This study design used a study design based onstandard AS / NZS 4360:2004 with a semi-quantitative method using the JobHazard Analysis (JHA). Risk analyzes were conducted to analyze the value of theconsequences, opportunities and the frequency and analyzed using the methods ofFine existing AS / NZS 4360:2004. The results showed that the level of risk thathas not been found acceptable on every process of making out is very high,priority one, substantial, and priority 3. Therefore, given the recommendation thatis engineering, administrative, and use of protective equipment.
Keywords:AS/NZS 4360:2004, risk assessment, probability, exposure, consequences, Levelof risk
Read More
Kata kunci:AS/NZS 4360:2004, penilain risiko, kemungkinan, pemajanan, konsekuensi, levelrisiko.
This Risk management of safety and health research that was held at plant tofu xin 2012, is a descriptive study. This study design used a study design based onstandard AS / NZS 4360:2004 with a semi-quantitative method using the JobHazard Analysis (JHA). Risk analyzes were conducted to analyze the value of theconsequences, opportunities and the frequency and analyzed using the methods ofFine existing AS / NZS 4360:2004. The results showed that the level of risk thathas not been found acceptable on every process of making out is very high,priority one, substantial, and priority 3. Therefore, given the recommendation thatis engineering, administrative, and use of protective equipment.
Keywords:AS/NZS 4360:2004, risk assessment, probability, exposure, consequences, Levelof risk
S-7720
Depok : FKM UI, 2013
S1 - Skripsi Pusat Informasi Kesehatan Masyarakat
☉
Ahmad Syakir Azhikri R.; Pembimbing: L. Meily Kurniawidjaja; Penguji: Indri Hapsari, Ike Pujiriani
S-7907
Depok : FKM UI, 2013
S1 - Skripsi Pusat Informasi Kesehatan Masyarakat
☉
Amelia Anggarawati Putri; Pembimbing: Ridwan Zahdi Sjaaf; Penguji: Indri Hapsari Susilowati, Prihono Sapto Atmodjo
S-9741
Depok : FKM UI, 2018
S1 - Skripsi Pusat Informasi Kesehatan Masyarakat
☉