Abstrak: Tidak adanya pelindung (guarding) pada mesin dan peralatan kerja, jarangnya pemeliharaan mesin dan peralatan kerja, cara bekerja yang tidak mementingkan keselamatan, serta pengakuan pekerja yang sering mengalami cedera menandakan bahwa di Indah Jati Furniture memiliki risiko keselamatan dari bahaya mekanik yang terjadi akibat penggunaan mesin dan peralatan kerja. Tujuan dari penelitian adalah untuk melakukan penilaian risiko keselamatan dari bahaya mekanik.Job Hazard Analysis (JHA) digunakan untuk mengidentifikasi bahaya, sedangkan matriks risiko semi kuantitatif dari Fine digunakan untuk menilai risiko, nilai risiko didapat dari hasil perkalian antara probability, exposure, dan consequences. Hasil penelitian menunjukkan terdapat total enam belas jenis bahaya mekanik yang teridentifikasi pada enam proses pekerjaan dengan berbagai skenario.

---

Machines and work equipments that have no protection (guarding), lack of maintenance, working without concerned about safety, and workers who frequently having occupational injury indicate that in Indah Jati Furniture has safety risk of mechanical hazards arising the use of machinery and work equipment. The purpose of the study is to assess the safety risk of mechanical hazards.Job Hazard Analysis (JHA) is used to identify hazards, while the semi-quantitative risk matrix from Fine used to assess risk, the risk values obtained from the multiplication of probability, exposure, and cconsequences. The results showed there were a total of sixteen mechanical hazards identified in six work processes with various scenarios.

Abstrak: Penelitian ini membahas risiko keselamatan pada aktivitas bermain di area bermain outdoor TK Indria, Beji-Depok Tahun 2013. Penelitian ini adalah penelitian deskriptif observasional yang bertujuan untuk menentukan tingkat risiko keselamatan pada aktivitas bermain terkait penggunaan alat-alat permainan di area bermain outdoor dengan menggunakan metode semi kuantitatif AS/NZS 4360:2004. Penelitian ini melakukan identifikasi bahaya dan risiko di setiap tahapan (task) aktivitas bermain dengan menggunakan metode JHA (Job Hazard Analysis) dan menganalisis nilai probability, exposure, dan consequences di setiap tahapan tersebut berdasarkan tabel semi kuantitatif W.T Fine J. Hasil penelitian menyatakan bahwa tingkat risiko yang dimiliki pada setiap tahapan aktivitas bermain di area bermain outdoor meliputi level very high, priority 1, substantial, priority 3, dan acceptable.

---

This research discussed the safety risk in playing activity at playgorund area Kindergarten Indria, Beji-Depok 2013. Design for this research was descriptive observational study that objective to determine the level of risk safety on playing activity related playing equipment at playground area using semi quantitative method AS/NZS 4360:2004. The research identified hazard and risk using JHA (Job Hazard Analysis) and analyze the score of probability, exposure, and consequences at each stage in playing activity based on semi quantitative table W.T. Fine J. Results of this research showed that the level of risk at each stage in playing activity at playground area includes very high level, priority 1, substantial, priority 3, and acceptable.

Abstrak: Penelitian ini bertujuan untuk menilai risiko kesehatan pekerja akibat pajananTSP, PM10, PM2,5, Cd, Si, As, dan Pb yang dilakukan pada pengukuran outdoor,indoor, dan respirable personal lokasi pelabuhan dan membandingkannya dengannon pelabuhan. Penelitian ini bersifat deskriptif analitik dengan menggunakan desain penelitian cross sectional. Berdasarkan hasil penelitian diperoleh hasil karakteristik risiko (RQ) debu outdoor TSP dan PM10 kurang dari 1, sementara PM2,5 lokasi Hopper 4 lebih dari 1. Untuk RQ debu indoor PM2,5 pada lokasi Hopper 6 dan barging lebih dari 1, sedangkan non pelabuhan RQ kurang dari 1.Untuk RQ personal respirable pada lokasi Hopper 6 dan genset lebih dari 1,sementara non pelabuhan kurang dari 1. Untuk unsur non karsinogenik Cd, Asdan Pb RQ kurang dari 1, sementara unsur karsinogenik As dan Cd nilai ECRkurang dari E-4 dan Silica nilai ECR lebih dari E-4.Kata kunci : TSP, PM10, PM2,5, Cd, Si, As, dan Pb, karsinogenik, nonkarsinogenik, analisis risiko, karakteristik risiko

---

The purpose of this study is to analyze the occupational health risks of workersexposed to TSP, PM10, PM2, 5, Cd, Si, As, and Pb that were carried out onmeasurements in outdoor, indoor, and personal respirable port location andcompare it to the non-port. This research is a descriptive analytic cross-sectionalresearch design. Based on this research, the results are risk characteristics (RQ)outdoor TSP and PM10 dust is less than 1, while PM2,5 located at Hopper 4 ismore than 1. For indoor dust RQ PM2,5 located at Hopper 6 and barging morethan 1, while on the non-port RQ is less than 1. For personal respirable RQ locatedat Hopper 6 and genset are more than 1, while in the non port is less than 1. Fornon-carcinogenic elements Cd, As and Pb RQ are less than 1, while thecarcinogenic element As and Cd, value of ECR is less than E-4 and for Silica valueof ECR is more than E-4.Key Word:TSP, PM10, PM2,5, Cd, Si, As, dan Pb, carcinogenic, non- carsinogenic, riskanalysis, risk characterization

Abstrak: Penelitian yang dilakukan membahas mengenai proses manajemen risiko yangada pada tempat cuci mobil FJM mulai dari tahapan identifikasi hazard dan risiko,analisis dan evaluasi risiko, penilaian risiko, upaya pengendalian, komunikasi dan konsultasi hingga pemantauan dan telaah ulang. Penelitian yang dilakukan menggunakan metode semi kuantitatif yang mengacu pada standar AS/NZS4360:2004. Pada tahap identifikasi hazard dan risiko menggunakan tabel JobHazard Analysis (JHA) yang mengacu pada OSHA 3071 Revised (2002).Kemudian untuk proses analisis risiko mengacu pada tabel ukuran semi-kuantitatif berdasarkan kriteria Fine.Hasil penelitian menunjukkan bahwa ditemukan level of risk pada masing-masingtahapan proses pencucian mobil dari level of risk very high, priority 1,substantial, priority 3 hingga acceptable. Oleh karena itu dibutuhkan upaya pengendalian yang bersifat engineering, administrative, serta penggunaaan alat pelindung diri (APD).
Kata kunci :AS/NZS 4360:2004, manajemen risiko, kemungkinan, pemajanan, konsekuensi, level of risk.

---

This research was conducted in order to examine the process of risk managementthat happened at FJM Car Wash process, started from the hazard and riskidentification stages, analysis and the evaluation of risk, risk assessment, riskcontrolling, communication and consultation up to monitoring and review. Thisresearch was done by using semi-quantitative risks analysis that refers to theAS/NZS 4360:2004 standards. Hazard and risk identification stage was done byusing the table of Job Hazard Analysis (JHA) refers to the OSHA 3071 Revised(2002). For the process of risks analysis, it refers to the table of semi-quantitativemeasure based on fine criteria.The result of this research showed that the level of risk has been found on eachstage in the car wash process ranging from the very high level, priority 1,substantial, priority 3 up to acceptable. Therefore, the necessary control effortsare including the engineering, administrative and also the use of personalprotective equipment (PPE).
Keywords :AS/NZS 4360:2004, risk management, likelihood, exposure, consequences, levelof risk.

Abstrak: Penelitian ini membahas Manajemen risiko keselamatan dan kesehatan kerja dipabrik tahu x tahun 2012, penelitian ini bersifat deskriptif. Desain studi yangdigunakan merupakan desain studi berdasarkan standar AS/NZS 4360:2004 dengan metode semi kuantitatif menggunakan Job Hazard Analysis (JHA).Analisis risiko dilakukan menganalisis nilai konsekuensi, peluang serta frekuensidan dianalisis menggunakan metode Fine yang ada pada AS/NZS 4360:2004.Hasil penelitian menunjukkan bahwa ditemukan level risiko yang belumacceptable pada setiap proses pembuatan tahu yaitu very high, priority 1,substansial, dan priority 3. Oleh karena itu, diberikan rekomendasi yang bersifatengineering, administrative, serta penggunaaan alat pelindung diri.
Kata kunci:AS/NZS 4360:2004, penilain risiko, kemungkinan, pemajanan, konsekuensi, levelrisiko.

---

This Risk management of safety and health research that was held at plant tofu xin 2012, is a descriptive study. This study design used a study design based onstandard AS / NZS 4360:2004 with a semi-quantitative method using the JobHazard Analysis (JHA). Risk analyzes were conducted to analyze the value of theconsequences, opportunities and the frequency and analyzed using the methods ofFine existing AS / NZS 4360:2004. The results showed that the level of risk thathas not been found acceptable on every process of making out is very high,priority one, substantial, and priority 3. Therefore, given the recommendation thatis engineering, administrative, and use of protective equipment.
Keywords:AS/NZS 4360:2004, risk assessment, probability, exposure, consequences, Levelof risk

Abstrak: Pabrik Tahu X Citeureup merupakan produsen makanan di Kabupaten Bogor yangmemiliki faktor dan potensi bahaya dan risiko pada setiap prosesnya. Penelitian inibertujuan untuk mengetahui risiko keselamatan dan kesehatan kerja, melakukanpenilaian, dan menentukan pengendalian yang mungkin dilakukan. Penelitian inimerupakan penelitian deskriptif dan desain studi cross-sectional denganmenggunakan tool berupa standar manajemen risiko AS/NZS 4360:2004 danperhitungan risiko dengan formula W.T Fine. Hasil penelitian menunjukkan bahwaterdapat level risiko yang belum acceptable pada setiap proses pembuatan tahu,yaitu very high, priority 1, substantial, priority 3, dan acceptable. Rekomendasiyang dapat diberikan bersifat substitusi, engineering, administratif, dan penggunaanAPD.
Kata Kunci: AS/NZS 4360:2004, Penilaian Risiko, Kemungkinan, Pemajanan,Konsekuensi, Level Risiko.

---

Tofu Factory X Citeureup is food producers in. Bogor, which has factors and hazardand risk potentials in each process. This study aims to know the occupational healthand safety risks, do assessment, and determine control may be performed. Thisstudy is a descriptive study and cross-sectional study design using tools such as riskmanagement standard AS/NZS 4360:2004 and risk calculation with the W.T Fineformula. The results showed that there are risk levels not acceptable in any processof making tofu, is very high, priority 1, substantial, priority 3, and acceptable.Recommendations that can be provided is substitution, engineering, administrative,and use of PPE.
Keywords: AS / NZS 4360: 2004, Risk Assessment, Probabilities, Exposure,Consequences, Risk Level.